Loading

How to Reupholster Kitchen Chairs

Want a quick kitchen update without breaking the bank? I’ve got a deal for you! Right now Joanne Fabric is offering 50% off select patterns, and we scored big time yesterday!

These are the kitchen chairs… before. They’re not the worst. They actually go very nicely in our kitchen.

My quarrel with the chairs was really the quality of fabric. EVERYTHING sticks to it and it’s impossible to keep clean. I have picked food and individual dog hairs off these chairs because this particular fabric is indubitably a descendant of Duct Tape. Even using the attachment on our Dyson vacuum would not so much as suck a single hair off this fabric. After years of battle, it was time for a update.

img_3639

Here’s the new fabric we picked up for $30 at Joanne Fabric. It was originally $60, but they were running a 50% off sale.

To get started, you’ll need to remove the seats from the chairs. I used a screw driver and this took about 5 mins total. Don’t worry about unscrewing the legs! Ignore the bolts in the corners of your chair. You’ll just need to unscrew the seat from the frame.

img_3672

Once you have the seat removed, place the new fabric and the seat upside down on a large flat surface. I figured out how much fabric I needed for each piece ahead of time.

I didn’t remove the existing fabric because other than annoying me, there was nothing wrong with it. No huge stains, or rips, and the cushions were all in excellent condition. I decided to avoid that mess and opted to cover it all. The fabric I chose was also thick enough that the underlying color would not show through.

Place the cushion upside-down on the fabric and estimate it’s position, and how much excess fabric you will need to be able to staple it securely to the bottom on the cushion. Once you’re confident you have enough fabric, cut this piece away, saving the remnant fabric for the other cushions.

I used a Stanley stapler and staples for the next part.

img_3652

You can pick up one of these from Home Depot for about $10. I had this in the garage from previous DIYs. It’s definitely worth the investment!

Pull up the first piece of fabric and staple it into position. Along the same side, continue to staple, but leave about 1.5 inches from the corners. I originally put about 4 staples on the bottom side before moving to the left. I went back and added more, but before I went staple crazy, I wanted to make sure it was crisp looking incase I needed to remove any staples and reposition the fabric.

img_3656

You’ll need to pull the fabric each time you staple and make sure it’s fitted tightly around the cushion. At this point, each side should be stapled, with the 4 corners still free to make pleats. The pleats are important because the’ll give you crisp corners.

Basically, you’re going to fold this like you’re securing all the Mexican goodness into a burrito. First, you’ll need to pull the corner of the fabric straight towards the center of the cushion and staple. After you staple, you’ll have two “wings” to either side of the corner. Take the right wing and fold it left. Then staple. Then take the left wing and fold it right. Then staple. Repeat this 3 more times on all the other corners!

I timed myself for your convenience! After I removed all the seats from the frames, reupholstering the seats took about 12 mins each.

img_3662

When you’re all finished, you can cut away the excess fabric. You could include an additional dust cover on the bottom on the cushion if you want. Since I didn’t remove mine, I left the one that was there.

I found the easiest way to reattach the seat to the frame was to place it upside-down on a flat surface. The frame lined up perfectly with the previous holes and it screwed back together very quickly. Once I got the frame on, You could barely see the excess fabric. You won’t see this anyway since it’s under the chair! But I felt better knowing that it was hardly visible anyway.

Here’s a side by side  in our dining room so you can see the difference. I stopped to take this mid-DIY to share on my Instagram because I was so pleased with the results!

  

I’m so happy with the new fabric! Take a look a the afters!

4 comments

  1. Thanks for posting this! I have dining room chairs that are just as collectively sticky as yours….LOL
    I am definately using this to help me redo our chairs…..
    Yours came out great!!!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

X